Magnetic levitation ORC turbine rotor

Maglev ORC Systems

Recover low-grade heat conventional steam systems cannot use.

Oil-free integrated ORC turbine-generator systems for hot water, low-pressure steam, geothermal water and process waste heat.

A short parameter set is enough for an initial route check: medium, temperature, pressure, flow and operating hours.

50-2,500 kWConfigurable maglev ORC power range
70-150°CTypical low-grade heat-source range
Oil-freeMagnetic bearings reduce wear and lubrication systems

Best Fit

Use this route when the plant has steady low-grade heat that needs a practical power outlet.

  • Hot water, condensate or low-pressure steam is available for long operating hours.
  • The source is below the range where a conventional steam cycle is practical.
  • The project needs a compact, oil-free turbine-generator route matched to site conditions.

Fast Assessment

Send four inputs to start the review.

  • Source medium and composition
  • Temperature and pressure range
  • Flow or throughput estimate
  • Operating hours and cooling conditions
Typical next step

Send the parameters first, then we can confirm whether ORC is the most suitable route before detailed file exchange.

If the source is still being defined, send the best available range first and we can confirm the next data set required.

Engineering Fit

Designed around the source, site and operating target.

Boomtec combines turbine-generator integration, high-speed permanent-magnet generation, active magnetic bearings and configurable ORC plant layouts. Cooling routes and working-fluid selection are evaluated against the plant environment and heat-source profile.

Typical Sources

  • Industrial hot water and condensate
  • Low-pressure or corrosive process steam
  • Geothermal water and distributed heat
  • Chemical-fiber esterification steam

Parameters Required

  • Source temperature, pressure and flow
  • Annual operating hours and load variation
  • Cooling-water or ambient conditions
  • Electricity price and site constraints

ORC Technical Data

Review the product range, typical source parameters and selectable configurations.

If the source parameters are ready, send them first so we can confirm whether a maglev ORC route is suitable before detailed document exchange.